SAF-T-DRIVER Please note:   The SAF-T-DRIVER is a patent pending product. Click on the movie icon to the right to view a video of the Saf-T-Driver in action Saf-T-Driver in action  Easily drive 8-foot ground rods with the attached guiding system When driving 8-foot ground rods:  First, slide the guide and offset cleat onto the rod about 4’ from ground level.  Second, begin driving while standing parallel to the rod.  Third, as the cleat moves closer to the ground, slide it up in 2-foot increments.  Fourth, when the top of the rod is approximately 3-4’ above ground level, remove the offset cleat and  place the SAF-T-DRIVER on top of the rod to finish driving it in. K-Series K-Series Uses manual downward force applied by the user. Example:   A ground rod is driven 6” per drive in top soil/sandy loam, 3” per drive in clay and 2” per drive in shale.     NOTE: Both models will not harm the driving surface because it is encapsulated within the shaft of the driver.      Very lightweight and easy to use! SAF-T-DRIVER Accessories: Ground Rod Tip Rebar Tip Fence Post Cup T-Post Cup Chisel Tip Spade Tip Each adapter fits into the end of the SAF-T-DRIVER with rubber O-rings to securely hold it in place. SAF-T-DRIVER Uses: ·       Driving ground rods ·       Driving fence posts ·       Driving T posts ·       Driving rebar ·       Driving miscellaneous objects  ·       Breaking concrete & asphalt  ·       Break up hard soils  ·       Sign & road side reflector posts   SAF-T-DRIVER Safety Features: ·     Has grip tape on handles ·     Has DOT tape for reflectivity ·     Lightweight ·     Constructed of tempered steel ·     Self-stabilizing and guiding ·     Encapsulation of driving surface ·     Will not flair end of rod/pole/post Click on the thumbnail below to enlarge picture Image: