TORQUE ANCHOR SAF-T-ELECTRO PLATE 26"/36" SAF-T-TORQUE

The reusable SAF-T-TORQUE Anchor is made of heat treated forged aluminum, or forged steel.  Both anchors can be electro-plated. It can be manually installed, installed by using an impact wrench or by a Kelly Bar Adaptor on a derrick truck.   Currently Available:  46" Coming soon:  60", 72", 84" & 96"   Advantages: 1)  Can be installed and removed easily by one person 2)  More holding power at less depth 3)  Less time to install (average time using a 525 ft/lb impact wrench is 2-4 minutes) 4)  Can be used as a permanent or temporary anchor 5)  Anchor will not deteriorate due to electrolysis if copper coated 6)  Guy wire tensioning can be done by screwing anchor in ground 7)  70% less torque to install than a 10” helix anchor with an 8’/3/4” rod Fidelity Communications Test Click on the icon below to view the video of the test that Fidelity Communication performed on the SAF-T-TORQUE ANCHOR Click icon to watch Entergy's Anchor Test video          SAF-T-TORQUE ANCHOR PULL-OUT CHART Anchor Size Class 3 Class 4 Class 5 Class 6 Class 7 Class 8 Dense clays, sands & gravel; hard silts & clays Medium dense sandy gravel; very stiff to hard silts & clays Medium dense coarse sand & sandy gravels; stiff to very stiff silts & clays Loose to medium dense fine to coarse sand; firm stiff clays & silts Loose fine sand; soft-firm clays; varied clays; & fill Peat, organic silts; inundated silts, & fly ash 46"            14,927            13,261            11,595            8,332            5,000            1,000 Note:  The anchor holding capacities are dictated by soil conditions. Image: